These are the most widely used holographic products used in the industry as anti counterfeit & authenticity label application. It is not possible to remove the TE holograms from the surface on which they are applied, without showing any evidence of tampering. The Holograms get damaged and hence, the labels from a used original product can not be removed pasted on any duplicate product. If required they can be supplied at a little extra cost on films that leave behind a specific pattern, e.g. “VOID” or a check pattern etc. These can be supplied in sheet / reel forms for manual / machine application respectively

These are normal pressure sensitive holograms which can be applied on any surface like normal stickers and can be easily removed when peeled off. These can be supplied in sheets/ reels. Use generally for product promotional campaigns or as decorative labels. Cartoon images etc. can also be made.

In these holograms the metallic layer from the metalised polyester film is transferred/ stamped to the required substrate by application of heat and pressure. It is supplied in reels and can be supplied with or without sensor mark depending upon whether they are to be applied as unregistered images (Wall paper designed Logo & name etc.) or as  registered images

In this case, holograms are supplied in reel form i.e. continuous metalised polyester hologram strip coated with  pressure sensitive or heat transfer adhesive depending on the application. These strips can be laminated or heat transferred on the substrates like pouches, cards or blister packing etc. during packing of products on line

These are holograms in which Logo or Name of client/ message are printed on the top of a normal tamper evident hologram having “original”, “Authentic”, “Genuine” or some other generic security message as wall paper design in the background in holographic colours. In these holograms there is no mastering cost involved

These are Hologram labels made on Transparent High Refractive/ High Reflective Index (HRI) Tamper Evident films. The matter under the labels can be seen clearly through the Holographic Images. If an effort is made to peel them off or tamper with they get damaged

All type of STICKER holograms (Tamper Evident/ Non Tamper Evident/ Transparent/ Overprinted) can be serialised, with help of a special printers, individually for keeping records before and after application of holograms and also to have higher degree of security. The serial numbering can be of two types. Firstly with special Inks or secondly with Laser demetalisation at an additional cost

These are normal holograms laminated with special stitchable and waterproof linings. These can be stitched on cloth or leather with normal sewing machines

Combination Paper / PVC labels with Holograms

We peovide Paper/ PVC labels printed as per client specific needs and applied with the client specific Holograms, so that the client has only one process for application of labels having the protection of the authenticity Holograms.

Shrink sleeves are the seals use to seal the caps of the bottles or jars to there necks to avoid the possibility of adulteration by opening the caps of bottles or jars. In holo shrink sleeves a hologram strip is laminated from inside on the sleeves to ensure that the holograms aredamaged when the seal is broken & it makes the packed material absolutely pilfer proof and secure from counterfeiting. These can be supplied as cut pieces or as preformed caps for manual application and as pipes for automatic appplicators.  Holo shrink labels are similarly multi colour printed shrink labels for cartons/ bottles/ jars etc with Hologram strips applied from the inside.

Induction seals are leak proof seals applied with induction heating. They are used to seal PP,  HDPE or glass bottles / jars containing liquids, Tablets etc. or powders. In holo induction seals holographic film is laminated with aluminium foil to provide security and authenticity to the seal in addition to the normal sealing capability

These labels are made with double colour Scratchable coatings and with security cuts, Once applied over any printed matter, the matter can not be read and can be seen only by scratching the label with nail or coin. Can be used on Phone cards etc. These can be supplied as plain or with Holographic image

Scratch cards as per client’s needs on duplex printed as per their specific needs and the prizes etc. covered with a scratchable Hot stamped Custom Hologram as per client specific artwork

These are pressure sensitive self adhesive cloth/ paper labels with or without a custom design hologram on them. One can write on them. The writing can be protected (covered) with polyester /PVC film after writing or signing the  product /dispatch specification etc. on the label

Metalised Holographic films with beautiful general pattern / geometric designs in web widths of 1meter or 1.6 meters. Could be provided in lower widths adjustable within the web widths. Used for Gift wraps or for product packaging. Client specific designs can also be provided at additional cost

These are transparent films hot stamped with holographic general/ geometric designs with the clients logo/ name etc. to provide the no label look to the packing

These are printed (up to four colours) paper/ PVC labels or as Holograms that are covered with flexible Poly urethane dome. The Auto grade high quality PU is used. (Gurranted life outdoors is 03 Years). These are supplied as pressure sensitive self adhesive labels on sheets for manual application

These are made from special type of vinyl films, which once applied to the desired surface can not be removed as they break into pieces when effort is made to peel them off. They can be supplied with or without a custom hologram on them & with printing to make them extra secure and authentic

These are printed (up to four colours)/  embossed/ etched aluminum/ brass labels which can be supplied as self adhesive labels that can be pasted on the product surface as normal sticker or plain which can be fixed by riveting or with screws.